Description of the 2012 SPARROW Models for the Pacific Region
The SPARROW model results displayed here represent mean daily streamflow and average annual total nitrogen, total phosphorus and suspended sediment load in streams of the Pacific Region. The simulated streamflow represents long-term average source inputs and hydrologic conditions for the period from 1999 through 2014. The simulated loads represent source inputs similar to 2012 and normalized to long-term average hydrologic conditions for the period from 1999 through 2014.
Documentation of the SPARROW models for the Pacific Region of the United States
Wise, D.R., 2019, Spatially referenced models of streamflow, and nitrogen, phosphorus, and suspended sediment load in streams of the Pacific Region of the United States: U.S Geological Survey Scientific Investigations Report 2019-5112 https://doi.org/10.3133/sir20195112.
Wise, D.R, 2019, SPARROW model inputs and simulated streamflow, nutrient and suspended sediment loads in streams of the Pacific Region of the United States, 2012 Base Year: U.S. Geological Survey data release, https://doi.org/10.5066/P9AXLOSM.
SPARROW Surface Water-Quality Modeling Web Pages
National Website: https://water.usgs.gov/nawqa/sparrow/
Documentation of the modeling tool SPARROW (SPAtially Referenced Regression On Watershed
Schwarz, G.E., A.B. Hoos, R.B. Alexander, and R.A. Smith, 2006. The SPARROW Surface Water-Quality Model: Theory, Application, and User Documentation. U.S. Geological Survey Techniques and Methods Report, Book 6, Chapter B3. https://pubs.usgs.gov/tm/2006/tm6b3/;
Preston, S.D., Alexander, R.B., Woodside, M.D., and Hamilton, P.A., 2009, SPARROW MODELING - Enhancing Understanding of the Nation's Water Quality: U.S. Geological Survey Fact Sheet 2009-3019, 6 p. https://pubs.usgs.gov/fs/2009/3019/
The relationship between the scale of reporting of model results and uncertainty:
Model results can be displayed at several watershed scales. The smallest scale that can be used for reporting is the catchment scale at which model computations are made. For the Pacific models these are the 338,825 NHDPlus catchments (ranging in size from less than 1.0 to 54,881 square kilometers, with an average size of 3.13 square kilometers). Results can be aggregated up to larger scales for reporting: 322 HUC8 watersheds (ranging in size from less than 1.0 to 10,828 square kilometers, with an average size of 2,961 square kilometers), 18 HUC4 watersheds (ranging in size from 11,174 to 95,453 square kilometers, with an average size of 52,958 square kilometers), and two HUC2 watersheds (one with an area of 663,961square kilometers and one with an area of 289,272 square kilometers).The SPARROW model is, in theory, scale independent. However, the uncertainty associated with SPARROW predictions is expected to increase for watershed sizes smaller than the drainage areas of the calibration stations used in the model. The drainage areas for the calibration stations used in the Pacific region streamflow model ranged in size from less than 1.0 to 101,020 square kilometers, with an average size of 1,151 square kilometers. The drainage areas for the calibration stations used in the Pacific region total nitrogen model ranged in size from 13.2 to 116,210 square kilometers, with an average size of 6,085 square kilometers. The drainage areas for the calibration stations used in the Pacific region total phosphorus model ranged in size from 13.2 to 91,301 square kilometers, with an average size of 3,754 square kilometers. The drainage areas for the calibration stations used in the Pacific region suspended sediment model ranged in size from 6.16 to 108,945 square kilometers, with an average size of 3,426 square kilometers. The uncertainty associated with incremental load and yield predictions at the catchment scale is therefore expected to be larger than the uncertainty associated with predictions at larger scales.
Incremental Flow or Incremental Load
The predicted mean daily flow (cfs, cubic feet per second) or mean annual load of the constituent (kg, kilograms or MT, metric tons per year) leaving a stream reach that reflects only those sources contributed from within the incremental drainage area of that reach. The incremental value includes the effects of in-stream attenuation processes associated with one half of the incremental reach length. Incremental drainage areas are represented here as “catchments”.
Accumulated Flow or Accumulated Load
The predicted mean daily flow (cubic feet per second) or mean annual load of the constituent (kilograms or metric tons per year) leaving a stream reach that reflects the accumulated mass of the constituent contributed by all sources in the total drainage area upstream of the reach outlet. The accumulated value includes the effects of in-stream attenuation processes in all upstream reaches.
The Accumulated Load divided by the Accumulated Flow. This should be interpreted as the mean-annual flow-weighted concentration. Units are milligrams per liter.
Aggregated Flow or Aggregated Load
For results grouped by 8-digit HUC,4-digit HUC, 2-digit HUC, or state, aggregated flow or load represents the sum of incremental flows or loads for those selected areas.
The Incremental Flow or Load divided by the incremental drainage area of the reach. Units are millimeters per year, kilograms per square kilometer per year or metric tons per square kilometer per year.
The Accumulated Flow or Load divided by the total drainage area upstream of the reach outlet. Units are millimeters per year, kilograms per square kilometer per year or metric tons per square kilometer per year.
The Aggregated Flow or Load divided by the sum of the "grouped by" incremental drainage areas. Units are millimeters per year, kilograms per square kilometer per year or metric tons per square kilometer per year.
Delivery Fraction (definition)
The fraction of the flow or load leaving a reach that is not attenuated or removed by natural processes during downstream transport to a specified downstream target reach. A delivery fraction of 1 indicates that 100 percent of the flow or load leaving the reach is delivered to the downstream target.
For delivered results shown here, the downstream targets represent the estuaries and pelagic coastline of the Pacific Ocean.
Delivered Incremental Flow or Delivered Incremental Load
Incremental flow or load multiplied by the delivery fraction.
Delivered Accumulated Flow or Delivered Accumulated Load
Accumulated flow or load multiplied by the delivery fraction.
Delivered Aggregated Flow or Delivered Aggregated Load
For results grouped by 8-digit HUC,4-digit HUC, 2-digit HUC, or state, delivered aggregated flow or load represents the sum of delivered incremental flows or loads for those selected areas.
Delivered Incremental Yield
The Delivered Incremental Flow or Load divided by the incremental drainage area of the reach. Units are millimeters per year, kilograms per square kilometer per year or metric tons per square kilometer per year.
Delivered Accumulated Yield
The Delivered Accumulated Flow or Load divided by the total drainage area upstream of the reach outlet or total of the "grouped by" area. Units are millimeters per year, kilograms per square kilometer per year or metric tons per square kilometer per year.
Delivered Aggregated Yield
The Delivered Aggregated Flow or Load divided by the sum of the “grouped by” incremental drainage areas. Units are millimeters per year, kilograms per square kilometer per year or metric tons per square kilometer per year.
USGS Data Disclaimer:
Unless otherwise stated, all data, metadata and related materials are considered to satisfy the quality standards relative to the purpose for which the data were collected. Although these data and associated metadata have been reviewed for accuracy and completeness and approved for release by the U.S. Geological Survey (USGS), no warranty expressed or implied is made regarding the display or utility of the data for other purposes, nor on all computer systems, nor shall the act of distribution constitute any such warranty.
USGS Software Disclaimer:
This software has been approved for release by the U.S. Geological Survey (USGS). Although the software has been subjected to rigorous review, the USGS reserves the right to update the software as needed pursuant to further analysis and review. No warranty, expressed or implied, is made by the USGS or the U.S. Government as to the functionality of the software and related material nor shall the fact of release constitute any such warranty. Furthermore, the software is released on condition that neither the USGS nor the U.S. Government shall be held liable for any damages resulting from its authorized or unauthorized use.
USGS Product Names Disclaimer:
Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. Government.
This web application functions best in Chrome, Firefox, or Safari. Internet Explorer works but with slower performance.
Link to SPARROW REST Services:
SPARROW TEST REST Services
Unfortunately, the Find Location tool is not available at the moment. Work to restore service is currently underway.
SearchingIn addition to city, state, zip code, or general place names, USGS gaging stations and Hydrologic Unit Codes (HUCs) are also searchable.
Navigating the mapThe scroll wheel on the mouse can be used to zoom, and in the upper left area of the tool are "+" and "-" icons to zoom in and out, respectively.
Home LocationThe crosshair button will zoom the map to your location, and the home button will center the US on the map.
Opening a chartIndividual sources of water, nitrogen, phosphorus, and sediment comprise the SPARROW simulated loads and yields. Mapped and chart results can be shown for all or individual sources. Clicking on a SPARROW model feature will generate a chart showing the individual sources for the selected feature. The chart also contains a button to switch to a chart of all features currently displayed. (For more on the Chart features, see Data Display)
Explanation displayThe Explanation box can be expanded and collapsed
Using the ExplanationThe expanded Explanation box contains a legend for the currently selected SPARROW Model Results. The legend displays class breaks and values for the model results currently visible on the map, and updates dynamically with any change in mapped area.
Changing the basemap styleThe "Basemaps" panel allows a user to show various geographic information or landscape imagery as a background layer.
Changing or adding map layersThe "Map Layers" sidebar allows a user to add or remove layers as well as control the opacity of each individual layer.
Selecting a SPARROW ModelThe SPARROW Model can be changed at any time to view total phosphorus, total nitrogen, suspended sediment or streamflow.
Selecting an Area of Interest The Area of Interest dropdown menus can be used to customize the geographic area of the model results.
Grouping ResultsThe area of aggregation is controlled by the Group Results dropdown.
Selecting a Displayed Metric and SourceYields and loads can be viewed by making changes to the Metric dropdown in the Data Display panel of the sidebar. Yields and loads for individual sources can be viewed by changing the Source dropdown. To read more about metric definitions visit the About section or click here
Data Display OptionsOnce the Display Filters have been chosen, there are several ways to display data about the polygons of interest in the Data Display settings.
+ SelectClicking the Select button allows individual map feature selection. Multiple features can be selected. To unselect, hold the Shift key then Click the feature to unselect it. After all features of interest have been selected, click Stop Selecting.
Show ChartClicking the Show Chart button will show a window with two tabs; Chart and Table. The information in the Chart and Table will either represent the full feature layer visible on the map, or it will represent the selection chosen from individual selecting features. This window can be repositioned to view underlying map information. The Chart tab shows a chart for the full layer visible in the map based on the filters chosen in the Data Filters section. Clicking on a the chart legend items will toggle individual sources on and off, as well as recalculating the y-axis range. Mouse over a bar to see its corresponding map feature as well as the exact value for each source.
Selected Chart SegmentTo see a magnified segment of the chart, click+drag over the chart bars. The selected features are highlighted on the map. Moving the mouse over the chart bars will give the values for each source as well as show an additional highlight to the cooresponding map feature. To return to the previous chart view, click the Reset zoom button in the top right of the chart window.
Chart OptionsThe Chart Options button contains the option to change the background transparency. Clicking Change background transparency will toggle the background transparency between transparent and not transparent.
TableThe Table tab shows a tabular representation of the chart information on the Chart tab. The table can be sorted by any column. Moving the mouse over any table row will highlight that map feature on the map. Any zooming or resetting on the Chart tab will update the Table tab's contents.
Geospatial data from the links provided below contain the information needed to reproduce the maps and model results shown here and described in Wise, 2019 (https://doi.org/10.3133/sir20195112).
All Model Results
Calibration Site Information
We are loading the xxxxx...